^Наверх

Kratasol BM - buffer powder is intended for obtaining a washing buffer liquid serving for separation of various grouting and drilling fluids in composition and efficient washing out of the latter residues from the walls of wells with a dynamic temperature from 0 to 100 ° C.

Application area

The main area of ​​application is the separation of drilling and grouting mortars during the cementing process, preventing mixing, as well as increasing the degree of substitution of the drilling mud with cement and cleaning the walls of the well.

Benefits

  • Good washing ability;
  • The buffer composition is compatible with drilling and backfilling solutions;
  • Prevents the formation of thick, difficult-to-pumped mixtures;
  • Increases the completeness of the replacement of the washing liquid with a grouting mortar;
  • Improves the quality of adhesion of oil well cement.

Dosage

The recommended dosage of the additive is 3 - 50 kg / m 3 of solution in terms of dry matter. The range of recommended dosage supplements can be extended. The optimum dosage of the additive is established during laboratory selection. It is recommended to dispense with an error of not more than ± 2%.

Physical and chemical indicators

The name of the indicator

Indicator value

Test method

solution

powder

1. Appearance

Homogeneous brown liquid

Powder of brown color

According to GOST 27025 (section 1)

2. Mass fraction of active substances,%, not less than

35

90

According to GOST 14870

3. Density (at 20 ° C), g / cm 3 , not less than

1.16

-

According to GOST 18995.1 (section 1)

4. Bulk density, kg / m 3 , not less than

-

350

According to GOST 27801

5. Indicator of the activity of hydrogen ions (pH) of the aqueous solution of the additive with the mass fraction of the basic substance 1%, units. PH

9 ± 2

9 ± 2

According to ISO 4316

Transportation

In liquid form, the additive is supplied in bulk in auto- and railway tanks, as well as in plastic containers of various capacities.

In dry form, the additive is packed in paper or polypropylene bags with a polyethylene liner or soft containers such as MKR (big bags).

Storage

Store at a temperature of +5 ÷ +35 о С. Avoid exposure to direct sunlight. If the recommended storage conditions are violated, the physical, chemical and consumer properties of the product may change. Observance of the recommended conditions allows storing the additive within 12 months from the date of manufacture. In the case of the freezing of the aqueous solution of the additive after thawing and homogenization, Kratasol BM can be used in accordance with the recommendations.

Precautionary measures

It is recommended to use protective gloves when working with the additive. If the additive gets on your skin, you should wash it off with soap and water. Avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor if necessary. Dispose of the additive according to local regulations, do not pour into the soil, water, sewerage.

Recommendations for the use of the additive are presented on the basis of the available practical experience, in compliance with the rules and recommendations for transportation and storage.

For further information, please contact Pigment Technical Support.